Easy to Plug in and out

1. Installing inlet pipe: black water pipe can be cut to suitable length as needed and covered with filter head in one end and insert another end into the inlet hole of main engine.
2. Set up spraying pipe: Connect end cap, spray nozzle and pipe, attach spray nozzle to the proper place of terrarium and connect another pipe end to outlet hole of main engine.

Reliable Misting Nozzle

Create fine mist droplets that flash evaporate and increase the humidity almost instantly. Each joint can rotated 360 degrees, using it can add humidity to your terrarium quickly and in all directions.

How to fasten main engine

1. Fasten outside of terrarium by bracket hook. Connect the bracket hook to reserved hole on main engine and hang the whole set on the top frame of glass terrarium as below picture 2 shown (Method 1)
2. Fasten outside of terrarium by suction cup. Insert the suction cups to the reserved hole of main engine and attach the whole set on the glass terrarium as below picture 3 shown(Method 2)