2 Sets LoRa32u4ii Lora Development Board Module, JST-PH2.0mm-2P Connector, IPEX Antenna, ATmega32u4 SX1276 HPD13A 915MHz 868MHz, for Arduino UNO Mega 2560 Nano
  • 2 Sets LoRa32u4ii Lora Development Board Module, JST-PH2.0mm-2P Connector, IPEX Antenna, ATmega32u4 SX1276 HPD13A 915MHz 868MHz, for Arduino UNO Mega 2560 Nano
  • 2 Sets LoRa32u4ii Lora Development Board Module, JST-PH2.0mm-2P Connector, IPEX Antenna, ATmega32u4 SX1276 HPD13A 915MHz 868MHz, for Arduino UNO Mega 2560 Nano
Brand Stemedu
Memory Storage Capacity 32 KB
Connectivity Technology Wi-Fi, USB
Wireless Communication Standard 802.11b
  • Document link https(:)//tinyurl(dot)com/lora32u4ii
  • LoRa32u4 II is a light and low consumption board based on the Atmega32u4 and HPD13 915MHz LoRA module and an USB battery charging circuit
  • Interface Type: SPI
  • HPD13 wireless module: high-performance, highly integrated RF transceiver chip SX1276, Long communication distance, high anti-jamming, low current consumption, higher reception sensitivity performance
  • Ideal for creating long range wireless networks that can exceed 2.4 GHz 802.15.4 and similar, it is more flexible than Bluetooth LE, does not require high power unlike WiFi and offers long range.

Product information

Technical Details

Collapse all
Summary
Other Technical Details

Product Description

DIY0050 LoRa32u4 II Lora Development Board

Features of LoRa32u4 II Lora Development Board

1. Does not require high power unlike WiFi, but offers long range.

2. The ATmega32u4 is clocked at 8 MHz and 3.3 V. This chip has 32 K of flash, 2 K of RAM and built-in USB to Serial communication, debugging and programming capabilities without the need for an external FTDI chip.

3. It can also act as an HID device (mouse, keyboard, USB MIDI device, etc).

4. This board is also equipped with a LiPo and Liion charging circuit and a standard battery interface. It is fully compatible with Arduino.

Description:

  • ATmega32u4 @ 8MHz with 3.3V logic/power
  • 3.3V regulator with 500mA peak current output
  • USB native support, comes with USB bootloade and serial port debugging
  • Built in 100mA lipo charger with charging status indicator LED
  • With Reset button
  • Working voltage: 1.8 ~ 3.7V
  • Receive current: 10 ~ 14mA
  • Interface Type: SPI
  • Operating temperature: -40 ° C to + 85 ° C
  • Digital RSSI function
  • Automatic frequency correction
  • Automatic gain control
  • Radio wake-up function
  • Low voltage detection and temperature sensor
  • Fast wakeup with frequency hopping
  • Highly configurable packet handlers

DIY0050 LoRa32u4 II Lora Development Board

2DBi IPEX to SMA Antenna 868MHz 915MHz U.FL to Female SMA I-PX Extension Pigtail Cable

ST1283 terminal cable

LoRa32u4 II Lora Development Board

  • Document link:
  • http (:) //www (DOT) diymalls (DOT) com/files/DIY0050-DIY0051-LORA32U4.zip

  • https (:) //drive (DOT) google (DOT) com/open?id=0B8DSGdAr8_31RkQ0UGo2Nzh1YXM

2DBi IPEX to SMA Antenna

2DBi IPEX to SMA Antenna 868MHz 915MHz U.FL to Female SMA I-PX Extension Pigtail Cable

Description:

  • Frequency:850-960/1710-1880MHz
  • Type: U.FL to Female SMA
  • Impedance: 50 ohms
  • Gain: 2DBi

JST-PH2.0MM-2P Terminal Connector Cable

Description:

  • Electronic wire: UL1007-26AWG standard line 7 / 0.16MM 80 degrees 300V
  • Outside diameter: 1.3MM
  • Using Terminal Model: JST-PH2.0MM spacing -2P

Color arrangement:

  • The first hole is black line = 96MM
  • The second hole is red line = 88MM Tail Popi: 2MM green on the tin
LoRa32u4 II Lora Development Board

Package includes:

  • 2 X LoRa32U4 II Lora Module development board
  • 2 X JST-PH2.0MM-2P Terminal Connector Cable
  • 2 X 2DBi IPEX to SMA Antenna
LoRa32u4 II Lora Development Board Capacitive-Analog-Soil-Moisture-Sensor HC-SR501-PIR-Human-Motion-Sensor DHT11 Temperature and Humidity Sensor Module LXW5-11N1 Micro Limit Switch 110dB Electronic Black Mini Piezo Alarm Siren
LoRa32u4 II Lora Development Board Capacitive Analog Soil Moisture Sensor Module HC-SR501 Infrared PIR Motion Sensor DHT11 Humidity and Temperature Sensor Module LXW5-11N1 Microswitch SPDT 1NO 1NC Micro Limit Switch 110dB High-Decibel Active Buzzer
Type Stemedu 2 Sets LoRa32u4ii Lora Development Board Module, JST-PH2.0mm-2P Connector, IPEX Antenna, ATmega32u4 SX1276 HPD13A 915MHz 868MHz, for Arduino UNO Mega 2560 Nano Stemedu 5PCS Capacitive Analog Soil Moisture Sensor Module 3.3~5.5V Corrosion Resistant Humidity Detection Sensors DIY Electronic for Arduino Raspberry Pi Stemedu HC-SR501 PIR Motion Sensor Infrared IR Body Motion Detectors Module for Arduino Raspberry Pi(Pack of 5pcs) Stemedu DHT11 Humidity and Temperature Sensor Module 3.3V-5V Digital Temp Humidity Sensor 20%~90% RH Humidity Measure Range 0~50℃ Temperature Measure Range (Pack of 5) Stemedu 4PCS LXW5-11N1 Microswitch SPDT 1NO 1NC Micro Limit Switch Hinge Lever Momentary Push Button Switches 3A AC380V DC220V (Pack of 4) Stemedu 5 PCS DC 6-15V Electronic Buzzer Alarm Siren - 12V Active Buzzer Sounder - Continuous Beep Piezo Buzzers - 110dB High-Decibel
ESP32-S2-Saola-1R-Development-board ESP32-PICO-KIT V4 development board ESP32-S3-DevKitC-1-N8R8-development-board USB to ESP01 ESP8266 Wifi Programmer Multicolored Dupont Wire Breadboard Jumper Wires Ribbon Cable Double-Sided Protoboard PCB Board
ESP32-S2-Saola-1R Development Board ESP32-PICO-KIT V4.1 Development Board ESP32-S3-DevKitC-1-N8R8-development-board USB to ESP01 ESP8266 Wifi Programmer Multicolored Dupont Wire Breadboard Jumper Wires Ribbon Cable Double-Sided Protoboard PCB Board
Type ESP32-S2 ESP32-S2-Saola-1 Microcontroller Processor Module 4MB Flash + 2MB PSRAM ESP32-S2-WROVER Development Board Wi-Fi MCU Module for Ardunio IDE ESP32-PICO-KIT V4.1 ESP32 Development Board WiFi + Bluetooth Dual Modes USB-UART 4MB flash Microcontroller Module for Arduino ESP32-S3 ESP32-S3-DevKitC-1 N8R8 Development Board based on ESP32-S3-WROOM-1 module, 8 MB Quad flash and 8 MB Octal PSRAM, SPI Interface WiFi +Bluetooth 2 in 1 Microcontroller for Arduino IDE 2PCS USB to ESP8266 Adapter Module ESP-01 Prog ESP-01S Programmer Downloader CH340C Driver with Reset Button, Easy to use 240pcs Multicolored Dupont Cable 20cm 10cm Breadboard Prototyping Wires 40pin M-M, 40pin M-F, 40pin F-F Jumper Wire Kit for Arduino DIY Project (8" and 4") 42PCS Solderless Double-Sided Protoboard Universal PCB Board Prototype Kit Electronic Breadboard with 6 Sizes (2x8 3x7 4x6 5x7 6x8 7x9cm) for Arduino DIY Project







2 Sets LoRa32u4ii Lora Development Board Module, JST-PH2.0mm-2P Connector, IPEX Antenna, ATmega32u4 SX1276 HPD13A 915MHz 868MHz, for Arduino UNO Mega 2560 Nano

$39.00  $19.00
Save: 51% off

ARRIVING & SHIPPING SOON!! Free shipping over $30.00
90 Days Easy Returns View More Return Policy

Recommend Products


Antec FrigusAir A400 ARGB Air CPU Cooler
$49.00$98.00


  • Free delivery

    From $30

  • Support 24/7

    Online 24 hours

  • Free return

    365 a day

  • Payment method

    Secure payment

  • get promotion

    Secure payment