Must Read Before Using!

Two stroke 12 hp:

Firstly, Fill the gear oil (open gear box lid and fill it).

Secondly, Fill NO. 92 petrol, lightly press oil pump 6-10 times.

Thirdly, Fill engine oil don't exceed the head of the pattern.

Forthly, turn the throttle to the start up and turn the accelerator gets up to 50%.

Then, Rapidly pull the starter line.

After the motor start, please turn the throttle to running state.

Then, it can be operated now.

Don't do the following will avoid cylinder Scoring:

1.Start the motor in the water

2.Use the motor when it stop cyling water

Even if you want test the motor, it should be done in the river!

When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked.

Specifications:

Displacement: 246CC

Gear ratio: 2.08(27:13)

Cylinder: 2

Max.speed(r/min): 4500-5500

Gear Positions: F-N-R

Packing size: 120*70.5*37.5cm/47.24*27.76*14.76in

Ignition System: CDI

Cooling System: Water-cooling

Control System: Tiller control

Starting System: Manual start

Control System: #93 gasoline

N.W./G.W.: 26kg(57.32lb)/33kg(72.75lb)

Bore x Stroke(mm): 50x43

Recommended Propeller range: 3-8.9"x8.5”

Recommended Lubricant: 2 Stroke Lubricating oil

Mixing ratio: Fuel:oil=50:1

Trim and tilt system: Manual Tilt

Overall LxWxH: 793*320*996cm/31.22*12.60*39.21in

Standard fuel tank capacity: 12L

Paking list:

Outboard,instruction manual, flameout rope, oil pipe, 24 liter fuel tank, tool kit, split pin, spark plug, water pump impeller, starting rope, paper pad