• Type: 4.1 Channel Power Amplifier
• Input: Bluetooth / 3.5mm AUX / Headphone Jack / USB port / SD & TF Card
• Impedance: 4-8 ohm
• Power Output: 4 x 40W (RMS), 800W Peak Power
• Work Voltage: AC 110-240V
• Power Adapter: DC 12V 5A
• SNR: 80db
• Size: 17.6 x 14.7 x 4.3cm (6.9 x 5.8 x 1.7 inches)
• Weight: 515g (1.14 Pounds)

NOTE for Volume Control of Subwoofer:

• For those looking to buy this amp to use with an active subwoofer, there is a note. It can ONLY be controlled with the remote, if your active subwoofer does not have a separate volume control.

NOTE for the Remote Control:

• The remote only controls parts of all functions, not for full control. And please remove battery insulating sheet on remote upon receipt for it to work.

NOTE for Bluetooth Range:

• Please keep the distance within 16.4ft/5m between the device and amplifier without any wall blocking. But if you are connecting whith TV or PC devices, please keep the distance within 6.5ft/2m.

NOTE for Music Playback after the Amp Restart

• If you power off the amp with the remote it will play MP3 from where you stopped, but if you power it off with unpluging the power supply then it starts from its beginning.

NOTE for TV connection：

• You could connect the Suacopzar Audio Amplifier to your TV through audio cable. When connecting through the audio cable, please assure that the input selector has been adjusted to the line mode for proper use.