Home Electronics Computers & Accessories Networking Products 100Mbps Point to Point Wireless Bridge for Starlink, Wireless Outdoor CPE WiFi Bridge Wireless Access Point 5.8G Internet Bridge WiFi Extender 3KM Transmission Distance for PTP PTMP 2-Pack

100Mbps Point to Point Wireless Bridge for Starlink, Wireless Outdoor CPE WiFi Bridge Wireless Access Point 5.8G Internet Bridge WiFi Extender 3KM Transmission Distance for PTP PTMP 2-Pack

Brand	PRUBOVI
Model Name	WIRELESS BRIDGE
Special Feature	Weatherproof, Access Point Mode, Point to Point Wireless Bridge, Remote Access, Starlink Wireless Bridge See more
Frequency Band Class	Single-Band
Wireless Communication Standard	5.8 GHz Radio Frequency
Compatible Devices	Personal Computer
Frequency	5.8 GHz
Recommended Uses For Product	Outdoor
Included Components	2 X CPE750 Wireless Bridge 2 X PoE Power Adapter 2 X Metal Hoop 1 X User Manual
Connectivity Technology	Wi-Fi

100Mpbs Wifi Bridge: 100Mbps digital display bridge, transmission/ receiver automatic networking, supports point-to-point, point-to-multipoint transmission/ receiver flexible switching. WDS networking mode, video network dual compatible. Deep protocol optimization for wireless video surveillance and the underlying wireless driver is optimized in-depth, with stronger anti-interference ability and better stability.
3KM/ 1.8Miles Transmission Distance: High gain 14 dBi intergrated directional antennas built into the WiFi bridge extend networks up to 3 KM/ 1.8 Miles long range. The actual application transmission distance should be less than 3KM/ 1.8Miles( Barrier-Free). A few trees will not block the transmission speed of a point-to-point internet outdoor CPE.
Building to Building Extend the Network: You can extend your home's network to your garage, barn, store, warehouse, farm, etc. with the wireless bridge. No trenching and wiring is required for wireless connection, saving time and effort, wildly used in daily life. It reduces your network costs and helps you save money.
Plug and Play: 5.8G CPE750 is powered by a 24V PoE adapter( included) and supports dial pairing without entering the GUI. The wireless ethernet bridges are preconfigured, just connect the PoE power network to the second building but also can be used for monitoring.
5.8G Technology & IP65 Waterproof: Long range WiFi bridge using 5.8G single-band wireless transmission technology, with better anti-interference performance and good compatibility, strong anti-adjacent channel interference, better than 5.8G traditional CPE. This WiFi bridge kit is IP65 waterproof, dustproof, cold-proof and heat-resistant.
Compatible with Starlink: to get internet signals from starlink and transmit to another place via 5.8G WiFi bands, share starlink internet access for multiple place.

Product information

Package Dimensions

12.6 x 7.5 x 2.95 inches

Item Weight

2.2 pounds

ASIN

B0BR3XR9FJ

Item model number

Prubovi-cpe750long100

Best Sellers Rank

#640 in Computer Networking Wireless Access Points

Date First Available

December 26, 2022

Manufacturer

PRUBOVI

Country of Origin

China

From the brand

Product Description


	1Gbps Wireless Bridge	100Mbps Wireless Bridge	100Mbps Wireless Bridge	Wall/Pole Mounting Bracket	Wall/Pole Mounting Bracket
Model	CPE750-1000	CPE206	CPE750	bracket2bk	bracket2wt
Transmission Speed	1000Mbps	100Mbps	100Mbps
Distance	3KM / 1.8ML	2KM / 1.2ML	3KM / 1.8ML
Ethernet LAN Port	1 * 100Mbps + 1 * 1000Mbps RJ45	2 * 100Mbps RJ45 Port	2 * 100Mbps RJ45 Port
Wireless Bridge	✓	✓	✓
Application	Outdoor	Outdoor	Outdoor	Outdoor	Outdoor

Prubovi CPE750 is a long-distance 5.8G wireless transmission device. It uses wireless communication technology to transmit network data using air as a medium to perform long-distance point-to-point or point-to-multipoint interconnection. The working data link layer realizes the interconnection of local area networks. The transmission distance can reach up to 3km. CPE750 Video Bridge Transmission usually consists of two devices in AP and Client mode respectively. On the Client-side (Receiving side) CPE connects with IP Camera, at the AP side (Transmitting side) CPE connects with a video recorder. The AP can be receiving wireless data transmitted from multiple Clients, and it is easy and convenient for centralized management of the remote equipment. CPE is widely used in highways, reservoir river monitoring, elevator monitoring systems, site crane monitoring systems, port terminal monitoring systems, marine aquaculture monitoring systems, and so on. Point to point extend network Wi-Fi range, extend the network in the house to your barn, garage, church, warehouse through wireless bridge signal transmission. No need to install a new modem and pay for it every month, saving you money.

Package Included:

2 * CPE750 Bridge

2 * POE Adapter (24V)

2 * Cat 5e Network Cable

2 * Metal Hoop

1 * User Manual

Applications Case

Installed this between two buildings across the street from each other. We had two internet bills - now we have just ONE. Installation was easy. Setup was easy too. Just make sure one unit has the switch set to A and the other has it set to B. At each end plug in the POE (power over ethernet adapter) to the wall. Then one ethernet cable connects the POE adapter and the bridge unit and a second ehternet cable connects the POE adapter and the router (or modem). We have 55mbps service and are getting 50 - 59 mbps through the bridge.

Extreme Distances Even in Extreme Weather

This wireless bridge is designed to perform, even in harsh environments. Its IP65-rated waterproof and dustproof casing ensures it can withstand harsh outdoor environments. This includes prolonged exposure outdoors to sunlight, extreme cold, frost, snow, rain, hail, heat and humidity.

Easy Installation

You can fix the point-to-point bridge on the bracket (ASIN: B0BB2T8T4S) with metal ties, or you can hang it on the wall; 2 wireless bridges are installed face to face as much as possible, with a clear view. It is recommended to purchase the Prubovi Universal Bridge Bracket.

Lane Monitoring Application

Display your courtyard camera, garage camera, and driveway camera images in the monitoring room wirelessly, without digging and burying lines, destroying the road, and saving costs.

Switch Master-slave Bridge

Point wireless bridge switches the master and slave bridges through the A-B button, A represents the master bridge, and B represents the slave bridge. In point-to-multipoint, take one of the bridges as A, and the other bridges as B, and then set them to the same pairing character to complete the point-to-multipoint pairing.