VONETS VAP11G-300 is a WiFi Bridge/Wireless Signal Repeater/WiFi Hotspot signal extend, WiFi to Ethernet Adapter, can achieve WiFi to Wired or Wired to WiFi（WiFi to Ethernet or Ethernet to WiFi convert).

1. WiFi smart bridge function, can achieve WiFi to Wired or Wired to WiFi function, smart exchange;

2. WiFi smart repeater mode, WiFi signal repeater, can extend the distance of WiFi transfer, it supports WiFi hotspots scan automatically and WiFi hotspot memory function (up to 100).

Note: This device can't be plugged into a USB port and DC power source at the same time( two types of power supply can't be used at the same time)！ And please do not plug the USB cable into the PC/Laptop's USB port to power, must use a typical independent 5V/2A power supply.

How To Use Device? (Configuration steps)

First : Using a standard 5V/2A power supply to power up the device, need to disable the wireless card first if there is Laptop;

Second: Open the PC browser to enter 192.168.254.254, to interface and input ID: admin Password: admin （Suggest IE browser）

Third: Select WiFi hotspots to connect, enter the WiFi password, Restart to complete the configuration (You don't need to wait for the webpage to complete, just observe the WiFi light, it changes from slow flashing to fast flashing to indicate successful configuration), and do not power off the device when the configuration is completed or restarted.

Pay Attention:

1. If the application is AC managed AP, GoPro camera, Cisco AP, Hikvision surveillance system, select "MAC layer transparent"；

2. When using an iPhone or Huawei mobile phone as the source hotspot, you need to select "SSID and password authentication mode" during configuration.