Note: Choose New is FW568 V3 with Waveform, LUTs, 1920x1080 resolution; If You Choose Used Version, It Is the FW568 without Waveform, LUTs Version, 1920x1080 resolution

Let Your Video Shooting Become Easier

FEELWORLD has been committed to providing comprehensive broadcast monitoring and solutions for professional filmmakers. When you’ve put together rigs made up of powerful equipment, you want to be able to see shots that so much work has now gone into getting to that point. As a filmmaker, you need to pay special attention to the visual aspect in order to capture every moment of emotion. It’s not easy to evaluate your shot solely through your camera’s built-in monitor, especially if the entire unit is constantly rotating on a gimbal/ stabilizer, the camera on crane rig jib, One of the biggest issues when you are doing low-angle/ high angle shot is monitoring what you’re shooting. FEELWORLD monitor is an ideal tool for you to monitor the scene since you can install it where you can conveniently see it.

Compatible Battery: Sony F970, F960, F950,F930, F770, F750, F730, F570, F550, F530, series and Canon LP-E6 (Note battery not include, need purchase sperate)

FAQ:

1. Can't turn on the monitor

Make sure to use the standard 12V 1.5A power adapter to connect the monitor. If power is supplied by battery, please check if the battery is fully charged.

2.Have noise during recording

Long press “<“ button and turn down volume to near zero, can aviod have not nosie during recording. Long press ">" is increase the volume.

3.The monitor display " no signal"

1）Try another HDMI cable.

2）And please try to connect monitor HDMI to your computer, try if the monitor have signal?

3）Change the camera output singal, confirm the monitor input signal whether support the camera output signal.

4. The monitor display "Play and Slide show" when you coonect the HDMI signal format

It is need setting your camera. You need to switch on ‘secondary monitor‘ in the HDMI output settings and switch off ‘auto resolution’ you then need to pair ‘monitor resolution’ with ‘record resolution, and it is work.

1. Histogram
2. Embedded Audio
3. Peaking Focus Assist (Red, Green, and Blue are three colors that optional highlight over parts of the image in focus)
4. False Colors
5. Zebra Exposure
6. Nine Grid
7. Scan Mode (Under Scan, Over Scan)
8. Zoom (4x,9x,16x), Anamorphic Mode (1.3x,2.0x,2.0x mag)
9. Pixel to Pixel
10. Center Marke, Safe Area (80%,85%,90%,93%,96%,2.35:1)
11. Ratio marker (4:3,13:9,14:9,15:9,16:9,1.85:1,2.35:1)
12. Marker Color (Red,Green,Blue,White,Black）
13. Check Field (Red/Green/Blue/Mono)
14. Image Flip (H, V, H/V), Image Freeze, Zoom All U/D & L/R Zoom

More detail about these features, you can see the video.