Step 1 - Put on the neck strap and ear keepers

(1) Put on the neck rope into the elastic groove on each arm of the binoculars. So it can hang around the neck when not in use.

(2) Please place the black ear keepers on each arm of your binocular carefully. They may go on tight for your first use. Use liquid soap if needed to slide them on/off easily. Adjust them while on your head so the ear keepers sit snugly behind your ears.

Step 2 - Put on the eye shades and adjust the nose pads and the arms if needed

(1) Snap on the rubber eye shades to the backside of each lens to cut any unwanted side glare from the sun, water or bright lights.

(2) If needed, squeeze or expand with your fingers until the nose pads sit comfortably on your nose.

Step 3 - Adjust the eyepiece space

The eye spacing varies from person to person.

(1) Wear the binoculars firstly to see whether you need to adjust the space or not. If it need to be adjusted, each lens capable of sliding right or left in a groove. You must slide each lens independently in the groove.

(3) Use your thumb & forefinger to press the lens right or left. And repeat the process on the other lens until both are adjusted in groove and lined up with your eye spacing until you see a single circular field.

Step 4 - Focus the binoculars glasses

(1) Focus one eye on a distant object and rotate the adjustment ring on the lens until the image is clear.

(2) Then close this eye, and focus the other lens on the same object until it’s clear. If your glasses are set up correctly, you will see the images merge into one clear picture.