Measure equal parts of Resin and Hardener into separate measuring cups with a 1:1 ratio by volume - DO NOT VARY FROM THIS RATIO. If working on a porous surface like wood, prepare Seal Coat first.

Pour Hardener into mixing cup first, then add Resin, scraping sides and bottoms to ensure equal proportions. Mix thoroughly with stir stick for 3-5 minutes, scraping the sides and bottom of container for proper mixing.

Mixture self-levels up to 1/8 inch thickness for coatings, and can be poured up to 1 inch depth for casting. If thicker application is desired, multiple flood coat layers are needed. Wait 5-6 hours between layers.

Keep product in clean, dust-free environment until fully cured. Product takes about 5-6 hours to be dry to touch, and 24 hours to fully cure.