This Engine Cylinder Honing Deglazer Set is suitable for engine cylinders of automotive, motorcycle and industrial equipment, removing carbon and heat glaze deposits on cylinder bores quickly and efficently.
Medium 220 grit stones in the honing set enable faster and smoother removal of deposits and corrosion in engine, brake and all types of cylinders.
The wheel adjusts spring pressure of stones against cylinder bore, fasten the screw down can add spring pressure, turn the opposite to reduce tension.
The engine cylinder honing tool with self-centering flexible shaft does the deglazing job efficiently.
This cylinder hone set can hone cylinder hole from 2 inch to 7 inch.
The adjustable engine cylinder hone is designed for fast and accurate deglazing of cylinders. Our cylinder hone tool fits cylinders from 2 inches to 7 inches capacity selector ring switches between bore ranges.
Step1: Spray lubricant on the stones or the cylinder bores and get the hone set up on the drill.
Step2: Insert the engine hone into the cylinder and run the drill at low speed between 300-700 RPM.
Move the hone up and down around once a second.
Note: Don't push or pull the stones more than 3/4 inches out of the cylinder. Don't run the engine hone for more than 3 mins.
Step3: After honing, use a paper towel to wipe out the inside of cylinder.
From $30
Online 24 hours
365 a day
Secure payment