About the adhesion of print bed:
1、Before printing, it is necessary to wipe the plate with a soft cloth to、ensure that there is no dust on the bed to affect the adhesion of the print bed.
2、Before printing, it must be leveled, keep a distance of A4 paper thickness between the nozzle and the platform, so as to avoid the nozzle scratching the surface and avoiding the deformation of the bottom surface of the print model.
3、After our extensive testing, we recommend PET to print PLA and TPU and PETG. PEI print PLA /PETG/PC/ABS /TPU /Nylon etc.
About the cleaning of print bed after printing:
1、Wipe the stains with over 95% strength alcohol gently, the recommended cleaning time is less than 5 minutes.
2、Do not use any strong chemical reagents to clean PEI.
About removing the prints:
1、The hot bed temperature must drop to room temperature before removing the prints, otherwise it is easy to cause the PET film to tear and fall off.
2、 The small prints can be taken off directly by hand, the large prints need to bent PET-PEI sheet by hand and removed without other tools.