Home Automotive Tools & Equipment Brake Tools EWK 1-1 4 to 3-1 2 Inch 3 Stones Engine Cylinder Hone Tool Adjustable Cylinder Deglazer Piston Honer 220 Grit

EWK 1-1 4 to 3-1 2 Inch 3 Stones Engine Cylinder Hone Tool Adjustable Cylinder Deglazer Piston Honer 220 Grit

Brand	EWK
Material	Alloy Steel
Exterior Finish	Stainless Steel

【Perfect Honing】 EWK cylinder honing tool is perfect to deglaze the walls of cylinders in gasoline and diesel engines. Idea for remove burrs and properly roughen the cylinder walls to produce an oil holding cross hatch pattern and provide an adequate seal.
【Smooth Surface Deglazing】Fits 1-1/4" to 3-1/2" (31.75mm to 88.9mm) diameter brake caliper bores, engine cylinders of automotive, motorcycle and industrial equipment. The 3 pieces adjustable 1.96" stones cylinder deglazer is perfect to work with 1/4" power drill for effectively creating friction on cylinder bore.
【Highly Flexible】 Adjustable tension screw, controls the spring pressure of stones against cylinder bore to meet different piston diameters. The self-aligning and flexible shaft ensure a smooth movement to get you a nice even hatch pattern bore.
【Durable & Long Lasting & Replaceable】 Made of premium steel, maximize the cylinder honing tool with extra strength and durability. The 220 grit stones are replaceable and will worn out gradually depends on how often you use it.
【12+6 Month】Durable products backed by an extraordinary 12+6 months warranty.

Product information

Technical Details

Manufacturer

‎EWK

Brand

‎EWK

Item Weight

‎5 ounces

Product Dimensions

‎8.66 x 1.57 x 1.18 inches

Country of Origin

‎Taiwan

Is Discontinued By Manufacturer

‎No

Exterior

‎Stainless Steel

Manufacturer Part Number

‎EB0270

From the brand

Product Description

EWKtool-EB0270-amazon-breaker-hone-hone-holder-hone-steel-brake-cylinder-hone-stone-set-honer-tool

Instruction


Wipe some honing oil around the cylinder wall. Installed the honing tool on a power drill and insert the hone into the cylinder.	Maintain a medium drill speed and keep oiled while moving the drill inside the cylinder back and forth.	After remove carbon, rust, and hest glaze from piston cylinder walls. Spread some clean engine oil around the bore to ensure that no rust develops.

Note

Prior measurement of the cylinder diameter is crucial before making a purchase decision.
Do not over roughen the cylinder walls and only use medium drill speed or you will damage the surface and cause cylinder leakage.
Using an impact wrench at around 2000 RPM is recommended for the operation.
Only pull the engine honer out when the rotation has completely stopped. Squeeze the honing stones together by hand to prevent deep scratches on the cylinder bores.


	1" to 2-1/2" Cylinder Honing Tool	1-1/4" to 3-1/2" Cylinder Hone Tool	2" to 7" Cylinder Honing tool
SKU No.	EB0210	EB0270	EB0211
Capacity	Ø1" to Ø2-1/2"	Ø1-1/4" to Ø3-1/2"	Ø2" to Ø7"
Stone Size	1"	1.96"	3"
Length	8.2"	8.9"	12"
Stone Spec	220 Grit x 3pcs	220 Grit x 3pcs	220 Grit x 3pcs
Drive	1/4” electric drill	1/4” electric drill	1/4” electric drill