All-in-one Diagnostic Scan Tool for Mercedes-Benz/Maybach/Sprinter/Smart + Lifetime Update + No Subscriptions!

The SC530 ABS scanner is a powerful diagnostic tool for the Mercedes Series. This automotive scanner just be inserted through a vehicle OBD port to access all systems, special service reset, perform sensor activations, and display live sensor data from all modules. SC530 code scanner has 10 functions OBDII modes for all cars, as well as support for I/M readiness test and freeze frame data. If you are looking for a car scanner that is budget-friendly and offers similar functions to a dealer scanner, look no further than the CGSULIT SC530.

Support 80+ Car Makes - Wider Vehicles in one device

• This SC530 bidirectional OBD2 scanner had pre-installed software for the Mercedes Series Car. Please ADD SOFTWARE FOR SPRINTER AND SMART BY UPDATING.
• If you have another vehicle make needs to be tested, you can reach out to us to add another and more car makes instead of buying another scanner. Once added successfully, they can be used simultaneously and permanently.

Perform All System Diagnostics + Display Live Data

1. For ABS Systems: Such as diagnose sensor fuse blown, insufficient brake fluid, sensor failure, etc.

2. For the SRS (Airbag) System: Such as identify fault areas such as damaged seat belts, corroded crash sensors, etc.

3. For the Transmission System: Such as avoid the feeling of rubbing or rattling gears, burning smells, slipping gears, low or leaking transmission oil, etc.

4. For TPMS System: Such as verifying low tire pressure, tire pressure monitoring control module failure, tire sensor recognition failure, etc.

5. For Engine System: Such as detect common problems such as poor lubrication, oil pump failures, oil deposits and debris, insufficient fuel and air compression, engine coolant leaks, clogged engine radiators, prolonged engine knock, damaged oxygen sensors, aging spark plugs, etc.

6. More available diagnostic systems include Air Conditioning, Active suspension, Audio Gateway, Electrical Power Steering, Auto Pilot System, Automatic Clutch System, etc.

Please Note:

Supported vehicle systems will vary by specific Chassis, Year, and Model.

SC530 Car OBD2 Scanner is a Powerful and Easy-to-Use Diagnostic Tool

Even if you are a novice, you can do your own service reset, just follow the navigation step by step.

1. ABS Bleeding: Anytime a brake system is opened to replace components such as calipers, wheel cylinders, the master cylinder, or brake lines or hoses, air gets inside. In this case, it will make the pedal feel soft and spongy. CGSULIT SC530 ABS scan tool can help you bleed the trapped air out of the ABS module, to get a firm brake pedal.

2. BMS Reset: SC530 battery registration scan tool helps you register a new battery.

3. Camshaft & Crankshaft Position Relearn: After replacing the camshaft and crankshaft position sensor, it is necessary that use SC530 Crankshaft relearn scan tool to perform relearn process to account for mechanical wear and manufacturing tolerances. Otherwise, you may face the engine will not start or run rough.

4. D-P-F Regeneration/Reset: Did you feel that your car has no energy? Are you afraid that when your car is climbing the engine will not provide enough power to affect your driving? SC530 diagnostic scan tool helps you to re-awaken the power of engine and improve fuel efficiency by D-P-F regeneration to clear the blockage.

5. Injector Coding: Need to replace a bad fuel injector? After replacing the injectors, you can use the SC530 automotive scanner to confirm or recode the injector codes for each cylinder so that each cylinder can better identify the injectors and accurately control the fuel injection to improve fuel efficiency.

6. SAS (Steering Angle Sensor): This obd2 scan tool can help reset the fault steering angle sensor memories. After resetting the sensor successfully, its fault memory will be automatically cleared.

7. Airbag (SRS) Reset: Sensors can fail or be tripped on accident to cause the airbag warning to illuminate. The SC530 airbag reset tool enables to check the sensors and reset the system to ensure the airbag system functions normally.

8. Oil Light Reset: SC530 oil reset tool performs reset maintenance mileage and date intervals for a new calculation of engine oil life system once changed the oil. Once reset, the oil service light will be turned off.

9. EPB (Electronic Parking Brake) Reset: Allows you to deactivate and activate brake, assist with brake fluid control, open and close brake pads, and set brake after disc or pad replacement.

10. More Special Functions such as T-P-S Adaptation, TPMS Reset, Change Tier Size, EVAP Test, Clutch Adaption, Turbo, Transmission Learn, etc.

Warm Tips on Functional Compatibility:

• The compatibility of special functions varies with car models.
• Not all special functions are fit for the same car.
• It will be better to confirm compatibility before purchasing.

Unlike other OBD scanners that only support retrieving diagnostic trouble codes (DTCs), looking at parameter data, and doing routine special resets, the SC530 diagnostic tool has Bidirectional Control, also known as Active Test, which allows you to test individual components and control modules to assist in troubleshooting and diagnostics. By activating this component, you can help figure out which components are working as expected and which components are not. After the test is complete, the system or component will usually return to normal operation. This test is part of a larger diagnostic process that can be run on command to save you time in identifying the defective part, component, or system.

Example of Included Bidirectional / Active Tests

• Fuel Pump Test
• Cooling Fan Test
• Modulate the Throttle
• Open/Close Windows
• Operate Mirrors
• Loudspeaker Test
• Bulb Test
• And More …