ATOMSTACK X20 PRO Laser Engraver with F2 Honeycomb Laser Bed

• Stainless Steel Metal Multicolor Engraving
• 12mm Basswood Cutting in One-PASS
• 8mm Acrylic Cutting in One-PASS
• It can even cut 0.05mm thin sheet metal
• Patent APP and MCU control system
• Built-in Powerful air assist kit

1. Multi-function: Use the atomstack roller to realize cylindrical engraving, cans, round wood sticks, etc. (1-130mm); special-shaped objects: mugs with handles, tumblers, special-shaped cylinders, etc.; spheres: baseballs, glass balls, table tennis balls and other pure round spheres (4-200mm); Ring items: rings, bracelets, etc. (4-130mm); 2. No installation required: As an industrial clamping tool customized for laser engraving machines, R1 Pro can be used out of the box without installation, and can be used quickly by connecting to a computer; 3. Safe and stable: The R1 PRO claw disc roller is composed of high-strength aluminum alloy material as a whole, and the claws are made of high-hardness brass, which is firm and reliable, and will not slip wire for long-term use; 4. Accurate and high speed: With the support of high-torque motor, the maximum engraving speed can reach 6000mm/min, and the engraving accuracy can reach 0.1mm; 5. High adaptability: atomstack R1 Pro multi-function roller can adapt to all Atomstack and O***r, N**E, x****l and other frameworks;

Super high power: 20W optical power laser engraver. The laser output power soars up with the latest generation of four 6W laser coupling technology, is able to cut off 12-15mm thick tungsten board as well as the 8mm thick black acrylic board with only one pass, and even cut the 0.05mm thick stainless steel sheet.

Upgraded compression spot coupling technology: ultra-fine laser focus area is reduced to 0.08*0.1mm, high-density laser can easily cut 25mm thick wood, 30mm thick black acrylic; can directly engrave mirror stainless steel metal, ceramics, glass, and engraving &The cutting speed is 40% higher than the ordinary model, which can be comparable to the effect of the 150W CO₂ laser engraving machine.

The laser sintering temperature is up to 2400℃.

Upgraded high-performance fixed-focus laser: no need to adjust the focus before engraving; The focal spot area of the new laser is only 1/3 of the spot area of other ordinary lasers, new laser combine precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser.

Stainless Steel Metal Multi-color Engraving

ATOMSTACK X20 PRO LASER ENGRAVER is one of the most powerful semiconductor laser engravers, it emits laser with much more energy on a smaller spot, which makes higher temperature on steel surfaces. It would make more than 400 color choices on your steel surfaces.

Laser thermal effect, the thermal effect of laser on stainless steel surface is studied. Through the calculation of the laser thermal effect equation, the proportionality between the laser energy density and the film thickness is obtained.

Experiments show that as the laser energy increases, the color of the stainless steel surface changes in the following color sequence: orange-red-purple-blue-green-blue-green-green-yellow-green-yellow-orange-red.

The parameters can be changed to improve the simplicity and reliability of the adjustment to make the color.

1.Precise Scale Lines Axis: There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement. 410x400mm large area engraving interval can meet your various engraving needs.

2.Integral Screw Rod: The machine uses an integrated screw rod instead of a combined coupling. The stepping motor and the screw rod are integrated, which makes the movement of the laser more precise and the coupling more durable.

3.New Filter Panoramic Glass Eye Protection Design: the panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light, you and the people around you do not need to wear goggles, you can also watch laser engraving . Reduce the cost of your goggles and the inconvenience of wearing goggles.

4.Comes Standard with the F30 Pro Upgraded Air Assit Kit: the cutting capacity is greatly improved, as well as the cutting accuracy and quality is optimized to a considerable extent.The new X20 laser has a built-in tool-free focusing module as well as a built-in air-assist system, enjoy the concise beauty and cordless freedom.

5.Solid and Easy Installation Structure Design:The all-aluminum alloy anodized structure design makes the machine more durable, and improves the accuracy of engraving. The entire structure has been designed for quick assembly, and the assembly can generally be completed within 20-30 minutes.

6.Newly Upgraded Atomstack Self-Developed 32-bit Motherboard: built-in 256-bit color scale, achieving the finer engraving result and higher contrast effect. Now your projects are no longer in black only!