(1) Ensure that the air cooling is good, otherwise the temperature will be too high and the lens will overheat and crack
(2) There are condensation water drops in the lens barrel, which may cause the lens to break.
(3)The lens is stuck or pollute with the jets of the cut or engrave material, Uneven heating for a long time is easy to cause broken. It should be cleaned with cotton ball dipped in absolute alcohol or acetone in time.
(4) When adjusting the light path, the light path is not correct, the laser accidentally hit the edge of the lens and the junction of the lens barrel, resulting in broken.
Focal length is the distance between the lens and the workpiece(material being cut or engraved). Before replace or install the lens, please confirm the diameter and focal length firstly. It is recommended to use convex upward, flat or concave facing the engraving or cutting material.
PVD ZnSe Laser Lens
CVD ZnSe Laser Lens
GaAs Laser Lens
Si Laser Mirror
Mo Laser Mirror
Cu Laser Mirror
From $30
Online 24 hours
365 a day
Secure payment