This combination Beretta Closer with Door Patch requires no holes or notches in the glass, and can be installed in the floor or overhead. When used in the floor, it can handle up to a 176 lb. (80 kg) door with a maximum width of 35-1/2" (902 mm) by 94-1/2" (2.40 m) tall. When used overhead, the maximum weight of the door is reduced to 155 lbs. (70 kg) with a maximum width of 32" (813 mm) by 87" (2.21 m) tall.
Install the Closer along with any of the Door Patches, and simply slide your glass in, tighten the set screws and you are done, it's that easy! Important Notes: STRUCTURAL DISCLAIMER - All customers who in any way utilize this product are solely responsible to consult a structural engineer to determine the suitability of the product for the intended use and site conditions. All installers must be qualified and have professional knowledge about compliance with local, state and federal regulations, safety factors, and the appropriate choice of fixing material and procedures. Door using this closer should not have door stops.