Home Tools & Home Improvement Building Supplies Building Materials RODOT 433M Wireless Remote Switch, 110V 120V 240V 30A Relay RF Remote Control Light Switch for Pump,Lights Ceiling,Electrical Equipment with 328ft Long Range

RODOT 433M Wireless Remote Switch, 110V 120V 240V 30A Relay RF Remote Control Light Switch for Pump,Lights Ceiling,Electrical Equipment with 328ft Long Range

Operating Voltage	110 Volts
Connector Type	Wireless
Brand	RODOT
Item Dimensions LxWxH	3.54 x 2.76 x 1.18 inches
Mounting Type	Ceiling Mount
International Protection Rating	IP65
Control Method	Remote
Connectivity Protocol	X-10
Color	1
Unit Count	1.0 Count

【High Power Support】The receiver adopts a 30A relay, which can support high-power electrical loads (enough to meet the use of electric water heaters and high-power water pumps) to ensure long-term stable control. with 3000 watt resistive load, 800 watt inductive load.
【Strong Signal, RF Technology】The product is equipped with a signal antenna, and the remote control distance can reach up to 100 meters (open and barrier-free environment). ❤Note:①When the remote distance can’t meet the requirements, pls replace the battery; ②The remote distance will be affected by the environment. Don’t place the receiver or remote in a metal case or near a metal object; ③You can try to straighten the receiver or remote antenna to increase the remote distance.
【 Easy to Control】 The receiver can learn 20 remote controls, and each button of each remote can be learned. One remote control can control multiple receivers, or multiple remote controls can control one receiver, which is easy to operate, flexible, and any combination.
【Multiple Working Modes, High Safety】 The working mode of the receiver is adjustable and can be used with the remote control to switch between 3 working modes: instantaneous/switching/locking. ①Inching; ②Self-locking; ③Interlocking. Stable and reliable performance, high receiving sensitivity; low learning code repetition rate, with a re-learning mode, with high security, when the remote control is lost, you can delete the old code and re-learn the new code, so you can always control it.
【Wide application】 ❤ NOTE: The factory default power-on is in the power-off state; Power-on setting: press the receiver button 6 times, the setting is successful, then the indicator light will flashes 3 times (this setting does not need to press the remote control) . Mainly used in 110-240V industrial control and security fields, such as household appliances, production workshops, motors, water pumps, lights, motors, security industries, etc.

Product information

Technical Details

Operating Voltage

‎110 Volts

Connector Type

‎Wireless

Brand

‎RODOT

Item Dimensions LxWxH

‎3.54 x 2.76 x 1.18 inches

Mounting Type

‎Ceiling Mount

International Protection Rating

‎IP65

Control Method

‎Remote

Connectivity Protocol

‎X-10

Color

‎1

Unit Count

‎1.0 Count

Item Weight

‎5.3 ounces

Product Dimensions

‎3.54 x 2.76 x 1.18 inches

Batteries

‎2 CR2032 batteries required. (included)

Style

‎110V-240V remote switch

Finish

‎Black

Included Components

‎Switch

Batteries Included?

‎Yes

Batteries Required?

‎Yes

Battery Cell Type

‎Lithium Manganese Dioxide

Product Description

Technical Data Of Receiver:

Model Number:KR2201B-4

Input voltage: AC 110V /220V

Working current: 30A

Maximum load power: 3300W

Frequency: 433Mhz

Support encoding format: EV1527, PT2262

Working mode: Momentary, Toggle, Latching ,Time delay

Specifications Of The Remote Control:

Model Number: KT05-AB-4

Working voltage: DC6V

Working current: <25mA

Working frequency: 433MHZ

Transmitting power: +13dbm

Format: 1527 encoding

Package includes：

2* Remote Control

1* Receiver Module

1* manual

Do you want to easily open your garage door with a remote control? Is it easy to control your factory? , Can you easily control your home appliances? Our products just include these areas of use, which can meet any of your needs, and can also be used in high-power electrical appliances, bringing you the greatest convenience.

Our controller has a huge advantage. The antenna of the controller is wrapped with a layer of rubber ring. This is to facilitate better signal reception and prevent the antenna from being damaged. The design of the wiring in our controller is Flip the cover up and down, so that it can be fixed more firmly after the wiring is completed, and protect the connected line from damage. The voltage it can bear can be within 220v, and it can be used on high-voltage equipment

Our products are suitable for high-power electrical appliances, with high stability, can withstand voltages of 220v, strong receiving sensitivity, low learning code repetition rate, and easy to learn when you use the remote control to send codes, with new learning Functional mode, high security, can be configured in multiple remote controllers, our controller contains three functions, jog, self-locking and interlocking, these three functions can be in the two remote controllers we distribute accomplish. And it can be easily controlled in all aspects, and there is no interference and hindrance of any information.

Our products have passed strict product supervision. After countless tests, we have come to the following conclusions: remote control, strong signal reception, control through walls, high-power electrical appliances, applicable to a variety of electrical appliances, industrial Control and security fields, such as electric fans, electric lights, irrigation equipment, water heaters, household appliances, production workshops, alarms, water pumps, etc., can all be controlled by remote control.


About Toggle Mode: Press once the remote button , the relay connects , press the remote button again, the relay dis-connects . Set Toggle Mode : Click the Settings button on the receiver twice, wait for the LED to light up, and enter the setting state; then click the button (such as button A) on the remote control once, when the indicator light on the receiver flashes and goes out, the toggle mode setting is successful.	About Latching Mode: Press the remote button A, the relay connects, press the remote button B, the relay dis-connect. Set Latching Mode Click the Settings button on the receiver 3 times, wait for the LED to light up, and enter the setting state; click the button on the remote control (such as button A) once, When the indicator light on the receiver flashes and lights up again then click the button on the remote control (such as button B), The indicator light on the receiver flashes and goes out, Latching mode is set successfully.	About Momentary Mode: Press the remote button , the relay connects; release the remote button , the relay dis-connects. Set Momentary Mode Click the Settings button on the receiver once, wait for the LED to light up, and enter the setting state; then click the button (such as button A) on the remote control once, when the indicator light on the receiver flashes and goes out, the toggle mode setting is successful.