How to use
1. Assembling and locating the Engraving machine on steady desk well.
2. Make sure that your computer has a USB port output.
3. Place the control box in a ventilated dry place where there is no dust, no moisture
4. Connecting the control box with the Engraving machine and you computer and make sure the plug will not come off.
5. Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor with axis(X, Y, Z, A). Otherwise, it will damage the driver of the controller.
6. Correctly instal the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well.
7. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine.
8. You can enjoy making you dream with using our Engraving machine now.