Package：
1 pc JGB37-520 motor
1 piece mounting bracket
6 pieces M3 screws
4 pieces M3 screws and nuts
2 pcs 4.8mm reed terminal and sheathed female connector
Scope of application：
Parking locks, intelligent carts, medical devices, intelligent equipment, card dispensers, channel gates, vending machines, packaging machinery, sweepers, etc.
Motor precautions：
1. When you use the motor, there should be no binding objects, such as adhesive should not flow into the bearing through the rotating shaft, which will harm the operation of the motor.
2. The manual rotation of the shaft may have the opposite effect on the life of the motor, in order to extend the life of the motor, please check whether your load is in accordance with the regulations, do not overload or hang the end of the shaft with objects that affect the rotation.
3. Heavy eccentric radiation loads are harmful to the life of the motor.
4. Do not store the motor in high temperature or extreme humidity, or in corrosive gas, which will reduce the motor's effectiveness.
5. Do not run the motor in high temperature and humidity.
6. When soldering the motor terminals of positive and negative power supply, the temperature of the soldering iron should be 340°C to 40°C and the heating time should be within 3 seconds.
7. Do not allow the motor shaft to jam, when the power is transferred, the motor will overheat in a short time and burn its accessories.
8. Supply the specified power and be sure that it is within the measurable range. Do not press the pulley or gear into the motor with abnormal weight.
9. When installing the motor, the screws are too long, which may cause contact between the motor itself and the rotor, and may affect the characteristics.