Newest Cross Hatch Adhesion Tester Cross-Cut Adhesion Tester Kits with 1mm 2mm 3mm Blades, Magnifier, Handle, Brush and 3m Tape
  • Newest Cross Hatch Adhesion Tester Cross-Cut Adhesion Tester Kits with 1mm 2mm 3mm Blades, Magnifier, Handle, Brush and 3m Tape
  • Newest Cross Hatch Adhesion Tester Cross-Cut Adhesion Tester Kits with 1mm 2mm 3mm Blades, Magnifier, Handle, Brush and 3m Tape
  • Multi-blade cutter spacing are 1+0.01mm, 2+0.01mm
  • Multi-blade cutter addendum straightness are ≯0.003mm≯0.006mm
  • Multi-blade cutter working tooth tip width are ≯0.05mm
  • The instrument is mainly suitable for organic coating adhesion assay hatch
  • Applies not only to the laboratory, the construction site can also be used under various conditions

Product details

  • Is Discontinued By Manufacturer ‏ : ‎ No
  • Package Dimensions ‏ : ‎ 9.06 x 7.05 x 1.73 inches; 1.14 Pounds
  • Item model number ‏ : ‎ 43237-2
  • Date First Available ‏ : ‎ October 18, 2017
  • Manufacturer ‏ : ‎ top-tool
  • ASIN ‏ : ‎ B076J7FLHV
  • Best Sellers Rank: #192,142 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement)
    • #374 in Multi Testers
  • Customer Reviews:
    4.5 4.5 out of 5 stars 33 ratings

Product Description

23051111

23051113
Package includes:

  • 1 x Brush
  • 3 x Blades (1pcs 1mm 11 teeth, 1pcs 2mm 11 teeth, 1pcs 3mm 6 teeth)
  • 1 x Cross Hatch Cutter
  • 1 x Magnifier
  • 1 Roll of 3M Transparent Tape
  • 1 x Carry Box

Newest Cross Hatch Adhesion Tester Cross-Cut Adhesion Tester Kits with 1mm/2mm/3mm Blades, Magnifier, Handle, Brush and 3m Tape

Introduction:

This instrument is designed and manufactured according to the standard of ISO2409-1992, applicable to GB /T9286-98, BS 3900E6/ASTM D3359, the instrument draw the grid of a certain size by a certain specification of the tools by using the uniform force, cut and penetrate the coating to be a grid lattice graphics, to evaluate the adhesion of coating on the substrate through the assessment of the full extent of the grid

  • The instrument will make the coating lattice graphics cut and penetrate, hatch completed by six graphic classification, assess the effect of the coating adhesion separated from the substrate
23051113

Application:

  • The instrument is mainly suitable for organic coating adhesion assay Hatch
  • Applies not only to the laboratory, the construction site can also be used under various conditions

Technical Specification:

  • Multi-blade cutter spacing are: 1+0.01mm, 2+0.01mm
  • Multi-blade cutter addendum straightness were: ≯0.003mm≯0.006mm
  • Multi-blade cutter working tooth tip width: ≯0.05mm
23051114

Adhesion Test Class:

  • SO Class / ASTM Class / Test Results / Peeling area ratio(S)
  • 0 / 5B / The incision edges are smooth, without any peeling / S=0%
  • 1 / 4B / The incision at the crossing of minor peeling / 0<S≤5%
  • 2 / 3B / The incision edge and the crossing of a small piece of peeling / 5%<S≤15%
  • 3 / 2B / The incision edge and the crossing of a piece of peeling / 15%<S≤35%
  • 4 / 1B / The incision edge and the crossing of large piece of peeling / 35%<S≤65%
  • 5 / 0B / The incision edge and the crossing of a large piece of major peeling / 65%<S

23051115

23051116

23051116

Operation:

  • The specimen must be prepared according to ISOR1514 and ISO2828 requirements
  • The test piece is placed on the tablet hardness sufficient
  • Handheld Hatch handle, so multi-blade cutter perpendicular to the specimen plane
  • With uniform pressure, steady approach does not vibrate and 20-50mm/S cutting speed cutting program
  • The specimen is rotated 90 degrees on the cutting stroke cuts repeat the above operation, so as to form a lattice graphics

Operation:

  • With a soft bristle brush on both sides of the diagonal lattice pattern gently back 5 times, 5 times forward brush specimens
  • The test at least at three different locations on the test piece is completed, if the test results of three different positions, the experiment should be repeated at more than three positions, all while recording the results. To replace the multi-blade cutter, use a screwdriver blade Loosen the two screws, put the knives, knife blade attached to the handle side of the site, and tighten the screws

Attention:

  • All cuts should be through the coating, but not too deep cut substrates
  • As a result of the coating is too thick and hard and can not penetrate the material in the end, the experiment is not valid, but it should be stated in the test report
  • The test must be a US company 3M tape produced 610-1PK special tape test(or otherwise specified test tape). The tape posted on the whole cross hatch, and then tore off the minimum angle, the result may be in proportion to the gum off the area determined according to the film surface
  • The test should be carried out at a temperature of 23±2℃ and relative humidity of 50±5%







Newest Cross Hatch Adhesion Tester Cross-Cut Adhesion Tester Kits with 1mm 2mm 3mm Blades, Magnifier, Handle, Brush and 3m Tape

$40.00  $20.00
Save: 50% off

ARRIVING & SHIPPING SOON!! Free shipping over $30.00
90 Days Easy Returns View More Return Policy

Please Choose:

Recommend Products




  • Free delivery

    From $30

  • Support 24/7

    Online 24 hours

  • Free return

    365 a day

  • Payment method

    Secure payment

  • get promotion

    Secure payment