The switch is to make the power down process very quick. You don’t want to hunt around for a switch if you need to turn the power off on your router table or small machine right away especially while your hands are a little bit busy. It would be dangerous to reach down and underneath your router table while the machine is still working. And that’s why the switch is so valuable that they are hands-free.
Engaged with a large red, easy to see OFF paddle, simply bump the paddle with your knee, thigh or hip to shut the power off. A slight bump will do without much effort. And a large green recessed ON button is always visible on the top side of the paddle.
Only two screws needs to complete all of the steps required for the installation. Several minutes tops that’s all it took. The switch can be installed on most type of materials such as walls, machines and iron frames. Once installed and properly connected, make sure that the switch is in a safe position. If it is loose, be sure to fix the problem before using the switch.
Using 1.5 feet female wire and 5.5 feet long male wire. The female wire is used to connect the power tool plug, and the male wire is used to plug into the power source. Both cords are heavy duty cords to stand up to everyday exposure in workshops. No need to strip and twist the wires etc to get it worked. Simple wiring!
From $30
Online 24 hours
365 a day
Secure payment