Features:

• Main chip: U-BLOX M8030 KTBuilt-in TCXO, which maintain good consistency in the temperature of -40 ℃ ~ +85 ℃.
  
• GPS L1 C/A: The antenna built-in high-quality ESD protection [TVS tube] to ensure ESD keep 8KV above [Air discharge].
  
• SBAS L1C/A: It’s easy to adjust the baud rate, the default is 9600bps, and it supports command adjustment and internal adjustment.
  
• QZSS L1C / A: Support wide area differential GPS enhanced system in default. [S129, S137…. Wide area enhanced satellite.
• GLONASS L1OF: Built-in PATCH ANTENNA.
• GALILEO E1B/C1: Built-in magneto resistive sensor, I2C port output.
• BeiDou BD2[Option]: GPS and Beidou dual-mode positioning are supported in default.

Tracking channels: 72

Product Size:41.5*39.6*5.3mm

Positioning performance：

♥ Autonomous positioning: 2.5m [average]

♥ Auxiliary positioning: 2m [average], with SBAS assistance.

♥ Drift: <0.02m/s

♥ Timing accuracy: 60ns

♥ Reference coordinate system: WGS-84

♥ Maximum altitude: 50000 meters [Pay special attention to atmospheric temperature when flying at high altitudes, and you need to turn on the flight mode]

♥ Maximum speed: 500m/s

♥ Acceleration: <4g

Electrical performance:

Tracking sensitivity: -161dBm

Capture sensitivity: -148dBm

Cold start time: 29s [average]

Warm start time: 28s [average]

Hot start time: 1s [average]

Interface electrical performance:

Wide voltage range: the main power supply is +3.0~5.5V

UART port: GPS data; I2C port: magnetic compass data [HIC5883L]

GPS output data baud rate 9600bps, I2C port ADDR: 7bit 0x1E, 8bit_read 0x3D, 8bit_write Ox3E

Package Including:

1 X GPS BDS C