ANMBEST 2PCS 4 Channel 5V Relay Module with Optocoupler High or Low Level Trigger Expansion Board for Raspberry Pi Arduino
  • ANMBEST 2PCS 4 Channel 5V Relay Module with Optocoupler High or Low Level Trigger Expansion Board for Raspberry Pi Arduino
  • ANMBEST 2PCS 4 Channel 5V Relay Module with Optocoupler High or Low Level Trigger Expansion Board for Raspberry Pi Arduino
Contact Type Normally Open
Current Rating 10 Amps
Brand ANMBEST
Operation Mode Off
Coil Voltage 5 Volts
  • It is 4 Channel Isolated 5V 10A Relay Module, each relay can individually switch on/off by an opto-isolated digital input, Standard interface can be directly connected with microcontrollers and be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, DSP, etc., very convenient.
  • Equipped with high-current relay, maximum load: AC250V 10A, 15A 125VAC, DC30V 10A; Trigger current of opto-isolator: 5mA.
  • RELIABLE: Fault-tolerant design, even if the control line breaks, the relay will not move; With optical coupling isolation, triggering more reliable, more stable.
  • EASY to INSTALL: Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
  • High/Low level trigger can be selected by jumper. Very versatile, you can reverse the input logic with the jumper.

Product details

  • Package Dimensions ‏ : ‎ 7.56 x 5.28 x 0.79 inches; 4.59 ounces
  • Item model number ‏ : ‎ ANMBEST_MD314-319
  • Date First Available ‏ : ‎ December 4, 2020
  • Manufacturer ‏ : ‎ ANMBEST
  • ASIN ‏ : ‎ B08PP8HXVD
  • Best Sellers Rank: #13,006 in Industrial & Scientific (See Top 100 in Industrial & Scientific)
    • #11 in Electrical Relays
  • Customer Reviews:
    4.5 4.5 out of 5 stars 316 ratings

Product Description

Relay Module

The relay comes with 4 single channel 5V activation relay, ready to control 250VAC at 10A. Extra isolation with opto-coupler at the front end of control, and the activation logic for relay is configureable via a mini jumper.

Technical Specifications:

Channel: 4 channel
Working Voltage: DC 5V
Normally Open Compatible Load: 10A 250VAC; 15A 125VAC; 10A 30VDC
Quiescent Current: 5mA
Maximum Current: 190mA
Trigger Current: 2 - 5mA
Trigger Voltage(Low): 0 - 1.5V
Trigger Voltage(High): 2.5 - 5V
Insulation resistance: 100MΩ (500VDC)
Action time: less than 10ms
Release time: less than 5ms
Power indicator: Green
Relay status indicator: Red
Module Size: 73mmX50mmX18.5mm /2.87X1.97X0.73inch(L*W*H)
4 WAY 5V

High/Low Level Trigger:

  • 1. Low level trigger when jumper and L short circuit;
  • 2. High level trigger when jumper and H short circuit.
Package includes:

2 x Four Channel 5V Relay Module with Optocoupler Module

Input Interface:

  • DC+:connect to power positive (according to the relay voltage range)
  • DC-: connect to power negative
  • IN: relay module trigger pin (high or low level trigger Optional)
Relay Output:

  • Normally Opened (NO) : normally open pin of relay. NO pin is not connect to COM pin when relay off.NO pin is connect to COM pin when relay on;
  • Common pin (COM) : Common pin of the relay;
  • Normally closed (NC) : normally close pin of relay.NC pin is connect to COM pin when relay off.NC pin is not connect to COM pin when relay on.







ANMBEST 2PCS 4 Channel 5V Relay Module with Optocoupler High or Low Level Trigger Expansion Board for Raspberry Pi Arduino

$13.00  $6.00
Save: 54% off

ARRIVING & SHIPPING SOON!! Free shipping over $30.00
90 Days Easy Returns View More Return Policy

Please Choose:

Recommend Products


Genie Chain Glide Up Open Limit Switch
$7.00$14.00


  • Free delivery

    From $30

  • Support 24/7

    Online 24 hours

  • Free return

    365 a day

  • Payment method

    Secure payment

  • get promotion

    Secure payment