Reptile Misting System for Terrarium , Amphibians, Plants, Tank, Paludarium and Vivarium
Reptile Mister Automatic Misting System Humidifier is widely used with various reptiles, amphibians, indoor plants, Paludarium, Vivarium, etc.
24 hours circulation mode
Easy to set spraying time 1-60 seconds, interval time 1-24 hours timing mode, easy to set.
Optional working hours [8-24 hours] mode
Press and hold 2 touch buttons at the same time for 3 seconds, the left side of the display shows [C1] the right side shows the working time.
Improve the noise from the host when the machine is working, reduce the noise to about 40 decibels (1.5M test from the host)
Never worry about the machine will start at night will wake you up, for the reptile like quiet is the best choice!
The new fine water mist nozzle, adjustable 360 ° all-round, new adjustable spraying water mist range and water particle size.
Can be disassembled and cleaned to prevent clogging, can be fixed to the Terrariums reserved for the installation hole. Note: Without mounting holes, 14.5mm hole must be cut.
Using a new industrial-grade PCB motherboard, safe and stable, no more [8888] fault code.
New water shortage protection system, when the water tank is detected to be short of water, it will stop running immediately after 5 seconds of work. Protect the internal pump and extend the service life.
Can this reptile mister add additional nozzles?
Can add an additional 1-2, but it should be noted that the installation distance between the nozzle and the nozzle is about 20-30 cm best.
I set the spraying time to 30 seconds, why does the reptile mister host only run for 5 seconds?
Because the host does not detect the internal water pump sucking water, it starts the water shortage protection mode. Please connect the inlet pipe to the filter head and put it into the water, it will run according to the program you set.
Can I use tap water? What if the nozzle is clogged?
It is recommended to use pure water or RO machine filtered water as a priority. Clogged nozzles can be disassembled and cleaned for reuse.
What is the reason for no water spraying out at the first start?
Because there is air in the water pipe, you need to let the machine run for a few dozen seconds to discharge the air in the water pipe will be able to spray normally.
From $30
Online 24 hours
365 a day
Secure payment