1. The two-stroke outboard must use a mixture of Regular gasoline and two-stroke engine oil; add it to the fuel tank of the machine

2. The volume ratio of gasoline and oil during the running-in period of the new machine is 35:1;

3. After the running-in period, the volume ratio of gasoline and oil is 50:1;

4. Special attention: gasoline and engine oil must be pre-mixed and mixed well, and then poured into the fuel tank; 5. The outboard motor must be started in water, and do not start the engine on shore;

6. Loosen the vent screw on the fuel tank cover counterclockwise when starting;

7. When the outboard motor is started, the emergency flameout rope should be inserted, and the other end should be placed on the wrist or belt;

8. The running-in period is about 10 hours or a month, and during the running-in period, do not drive on the accelerator;

9. Replace the gear oil after the running-in period, and the second replacement time is after 100 hours or about six months;