- Macerator Toilet is Vibrating and Making a Loud Noise
If your macerator toilet is vibrating and making loud noises, then the likely scenario is that something has become lodged in the blade mechanism of the macerator. This can be solved by rotating the blades counterclockwise while the macerator is turned off and removing the object.
- The Macerator is Running But it is Not Pumping Water Out
It could be because the pipes are frozen. In order to remedy this, the service engineer will first need to turn off the power to the macerator. If any waste has overflowed, that will also be removed. From here, hot towels will be used to heat up the pipes and loosen up the frozen blockage. This should remedy the situation, allowing the macerator to pump out waste once again.
- My Macerator Toilet is Blocked and Keeps Backing Up Into my Bath/Shower/Sink
This could be because the macerator system has been accidentally disconnected from its power supply, or there could be a fault leading to the power being disconnected.
If this is not the case, there may be an issue with the motor which is preventing waste from being pimped out.
- The Macerator Pump is Starting on its Own
Problems with the microswitch of macerator toilets only happen when there is a fault, such as a misfiring microswitch as detailed above, or a damaged rubber membrane as mentioned previously.
TIPS: IF ANY ISSUE ABOVE YOU MEET OR ANY OTHER ISSUE YOU HAVE WITH THE MACERATOR TOILET, PLEASE CHECK WITH SANIMOVE PROFESSIONAL SALE SERVICE TEAM